CH Products Yoke for PC Flight Sim'ing

For Christmas I got a CH Products Flight Sim Yoke, a fairly simple USB-based yoke for my PC.

It worked right out of the box with a very simple installation process. I fired up MS Flight Sim after installing the yoke and was up and flying in no time. The buttons were setup to good defaults, with the 2 "panel" toggle switches setup to raise/lower the gear or raise/lower flaps. It also has a elevator trim wheel and plenty of hats and buttons.

I soon realized that I didn't have a control setup for the rudder, but there was a pair of buttons on the right top of the yoke for rudder trim. I found that using the trim was plenty good enough to keep me on the runway on takeoff.

All in all it is a nice device, not super high levels of quality but definitely worth its cost. Being a yoke, it gives a better "general aviation" feel than the joysticks I have used for the last 15 years on flight sims.

Since I also have the excellent thrustmaster Cougar HOTAS, I am contemplating building a little flight sim chair that can have all these controls mounted on/by it in the proper place. My desk is more than a little cluttered with all these game controllers now but I guess that is a nice problem to have.

Comments

Anonymous said…
Life is sometimes funny... few days ago I posted about how to build a personal flight sim for training and mentionned the CH-Products yoke as well. I used to have it for years, because it's integrating a three power levers quadrant which is really good for procedure training.

Click here to read my post about it
January 6, 2009 at 4:00 AM
Post a Comment

Popular posts from this blog

Updating data on the Garmin Perspective system

Image
After changing from the Avidyne system to the Cirrus Perspective (G1000) system, I had to relearn an important part of owning an airplane: how to update all the data the systems use. There's even more data in the Perspective, including AOPA directory data and more charts. In this walkthrough, I make use of the Jeppesen app for Apple OS X: JDM .  It has worked well for me, though I did need to call Jeppesen when I first set this up to get my subscriptions fixed up.  They gave great customer support when I did. The process starts (optionally) by hooking up a ground power unit (GPU).  In the case of the Cirrus, you can certainly do this without it, but I tend to hook it up just to be sure.  The systems draw about 8-10amps while updating, but you won't generally have the power on for long.  One tip I've read: power up the GPU before plugging it into the plane, at least for the one I bought.  That saves the plane from seeing any power spikes that might hav...
Read more

A-10C Standby Compass - Sun Shade

Image
 One of the final items to add to this instrument build (besides the text covers for the lower LEDs) was the sun shade for the AR LED box.  I made this out of thin aluminum sheets , cutting it from a template using some metal sheers .    My template was created by tracing some of the actual artwork from the DCS sim, and then scaling it to the proper size. It turned out ok, not perfect but pretty good.  Primed and painted it and then installed it using 2 of the 4 holes that were already on the LED box 3D print.  I used some heat inserts in those holes to give the screws something to bite, but the holes are really too big for my inserts so had to use some glue to help out.  
Read more

G1000 transistion training - emergencies - final flight

Image
For the final flight in my G1000 transition course we focused on failure scenarios. Not the "engine goes POOF" kind but the avionics kind. Normal situation This picture shows what the 2 Garmin screens show in a normal (non failure) situation. You can see we have 2 screens - the left PFD focusing on flight performance (airspeed, heading, attitude, altitude) and the right screen (MFD) focusing on engine data, mapping, checklists, and everything else. Failed PFD screen In this scenario the screen that is right in front of you (the PFD) has failed. This basically means the screen has gone dark. We simulate that by dimming the screen down to 0% brightness. After darkening the PFD we shot a GPS approach into Rock Hill. When this failure has occured you shift the G1000 into Reversionary mode. That means the info that is normally split across 2 screens is now merged into 1. It actually duplicates the same data on both screens, but since the PFD screen is no longer functioning...
Read more